管道或储罐表面冷凝、结霜
Condensation or Frost on Pipes and Tanks
低温、深冷或高湿环境中，传统保温系统一旦吸水或厚度不足，容易出现结露、结霜和保温失效。
In low-temperature, cryogenic or humid environments, insulation failure can lead to condensation, frost and energy loss.
查看气凝胶保温毡View Aerogel Blanket工程师最常遇到的问题
Problems Engineers Search For Most Often
如果您正在评估管道、储罐、阀门、弯头、设备外壳或深冷/高温系统的保温方案，可以先从下面的问题入口判断产品方向。
If you are evaluating insulation for pipelines, tanks, valves, elbows, equipment housings or cryogenic/high-temperature systems, these problem-based entries can help you choose a starting solution.
保温层下腐蚀（CUI）风险
Corrosion Under Insulation (CUI)
保温层进水、冷凝和长期潮湿会增加管道和设备腐蚀风险。疏水、低吸水的气凝胶材料可帮助降低 CUI 风险。
Moisture ingress and condensation can increase CUI risk. Hydrophobic, low-water-absorption aerogel insulation helps reduce this risk.
查看防冷凝方案View Anti-condensation SolutionLNG 与深冷系统冷损控制
Cold Loss Control for LNG and Cryogenic Systems
LNG 管线、储罐和深冷设备需要稳定的低温保冷结构，以降低冷损、减少结霜并保持系统稳定。
LNG pipelines, tanks and cryogenic equipment require stable insulation systems to reduce cold loss and maintain operation stability.
查看 ENYU-CS 应用View ENYU-CS Application高温管道和设备热损失大
High Heat Loss from Hot Pipelines and Equipment
蒸汽管线、炼化设备、电厂管道和高温工业设备需要在有限厚度内降低热损失和外表面温度。
Steam lines, refinery equipment, power plant pipelines and high-temperature systems require efficient insulation within limited thickness.
查看高温保温毡View High-temperature Blanket阀门、弯头和异形设备难施工
Difficult Insulation for Valves, Elbows and Irregular Surfaces
复杂表面和局部改造项目不适合厚重板材或传统包覆方式，气凝胶涂料可形成连续隔热层。
Irregular surfaces and retrofit projects often need continuous coatings rather than bulky conventional insulation.
查看气凝胶隔热涂料View Aerogel Coating空间受限，传统保温层太厚
Limited Space and Excessive Insulation Thickness
管廊、设备间、箱体和改造项目常受空间限制，低导热气凝胶材料可帮助减少保温厚度。
Pipe racks, equipment rooms, enclosures and retrofit projects often require thinner insulation systems with lower thermal conductivity.
查看气凝胶保温板View Aerogel Panel按问题快速选型
Quick Selection by Engineering Problem
点击后直接进入对应产品详情；如工况不确定，可联系 ENYU 协助选型。
Click to view the matching product details. Contact ENYU if the working condition needs selection support.